UL FM Grooved End Swing Check Valve

Features:
1. The swing check valve can be installed horizontally and vertically.
2. The inside of the valve has little resistance to the fluid.
3. It is sealed by non-stick EPDM.
4. All the stainless steel parts have good corrosion resistance.
5. It is FM and UL certified.

Dimension(mm)
Part Number Size(mm) OD A
Inch mm
VCG01-063 2 50 60.3 169
VCG01-073 2.5 65 73.0 183
VCG01-076 3OD 65 76.1 183
VCG01-089 3 80 88.9 198
VCG01-114 4 100 114.3 218
VCG01-140 5.5OD 125 139.7 248
VCG01-141 5 125 141.3 248
VCG01-165 6.5OD 150 165.1 270
VCG01-168 6 150 168.3 270
VCG01-219 8 200 219.1 325
VCG01-273 10 250 273.0 /
VCG01-324 12 300 323.9 /
Part Specification
1.Body Ductile Iron ASTM A 536
2.Seat Bronze
3.Clapper Stainless Steel 304
4.Facing Seal EPDM Rubber
5.Clamping Ring Stainless Steel 304
6.Gasket EPDM Rubber
7.Spring Stainless Steel 304
8.Hinge Pin Stainless Steel 304
9.Bolt Stainless Steel 304
10.Locknut Stainless Steel 304
11.Plug 1/4" NPT Carbon Steel
12.Plug 1/2" NPT Carbon Steel
Inquiry Form